Railhead ProductsWhat's NewIncredibit® Endurance™ EXTReam™ Dirt Reamers Sonde Housings Quick Connect BorePro Series Products Guide Testimonials FAQ Contact


Design Features


Lost Motion Assembly Solid Steel Nose Cone Plow Steel Mesh Grip


So unique they earned U.S. Patent No. 4,969,677

BorePro’s Maxi-Grips are durable and economical tools designed for pulling underground pipe and cable with speed and ease. Maxi-Grips consist of two primary components - a uniquely designed steel nose cone device and a heavy duty plastic coated galvanized steel mesh grip. Six models enable contractors to pull pipe and cable from 1/2 inch to 4 1/2inch outside diameters.

Provides the contractor with greater flexibility, convenience, and durability!

Unique nose cone design provides the user with several economic and time saving benefits not found in any other pulling device on the market today. First, each Maxi-Grip accommodates multiple sizes of pipe and cable, thereby minimizing contractor tooling costs. Second, the tapered nose cone provides a large, smooth compacted boring for pipe and cable to follow, thus reducing friction and allowing longer pulls. Also, the large boring eliminates cable “looping” when boring under walkways and driveways. Third, the nose cone design eliminates the need to seal pipe opening against outside contamination. The user merely slips the pipe into the nose cone and pulls the pipe - a real time saver. Fourth, since the mesh grips are mounted inside the nose cone, they last up to five times longer.

Pipe and cable are easily inserted - quickly removed.

"Maxi-Grip"® Pipe and Cable Pullers

Spring Pin Set Mesh Grip


Maxi-Grip With Mesh Grip Replacement Mesh Grips Spring Pin Set (2 Pcs.) Working
Model No. Outside
Pipe Size Grip Range Model No. Model No.
1.875" 1/2" - 3/4" .75" - 1.25" A-20 SP-100 2,000 6,000
1.875" 3/4" - 1" 1.050" - 1.400" B-24 SP-100 2,500 7,500
2.375" 3/4" - 1 1/4" 1.050" - 1.800" B-24 SP-125 2,500 7,500
3.0" 1 1/2" - 2" 1.75" - 2.375" C-26 SP-200 3,500 10,500
4.5" 2 1/2" - 3" 2.75" - 3.5" D-38 SCS-4
4,500 13,500
5.5" 3 1/2" - 4" 4.0" - 4.5" F-52 SCS-5
6,000 18,000
*Equipped with Forged Eye.

without Mesh Grip

Model No. O.D.
MG-100Z 1.875"
MG-125Z 2.375"
MG-200Z 3.000"
*MG-300Z 4.500"
*MG-400Z 5.500"


MAXI-GRIP® without Mesh Grip

Swivel-Eye Maxi-Grip®

BorePro's Swivel-Eye Maxi-Grips are designed to help relieve the twisting forces that are created when pulling pipe and cable underground. Today, they are being used extensively in the Directional Boring Industry to relieve destructive pulling torque on pipe and cable.

All Swivel-eye assemblies are custom manufactured by BorePro from Forged Carbon and Alloy Steels that are Heat-Treated to ASTM Standards for strength and wear resistance.

Swivel-Eye assemblies are attached to Maxi-Grips, both mechanically by thread and MIG welding, to insure maximum tensile strength and service life.

NOTICE: Do not push rearward when directional boring. You may crush pulling eye.

Swivel-eye Maxi-Grips
with Mesh grip

Model No. Pipe size
MG-100AS 1/2" - 3/4"
MG-125AS 3/4" - 1"
MG-100BS 3/4" - 1 1/4"
MG-200AS 1 1/2" - 2"
MG-400ES 2 1/2" - 3"
MG-300ES 3 1/2" - 4"
Home | Testimonials | FAQ | Contact Info | Site Map
©2002-2006 Railhead Underground Products, LLC