Railhead ProductsWhat's NewIncredibit® Endurance™ EXTReam™ Dirt Reamers Sonde Housings Quick Connect BorePro Series Products Guide Testimonials FAQ Contact


Railhead Customer Satisfaction

Drilling Success

"We don't use anything on our machines since we've been using the Incredibit. We have seen increases in our production of 15 to 20 percent. This bit is amazing! It uses half the commands that other bits use and stays level. It's heavy and doesn't want to fade. It actually wants to stay on course! In the Chatanooga, Tennessee area there is a lot of chip rock and loose rock. Other contractors have tried and failed to bore these jobs because they were only managing to drill a few hundred feet a week. Some have even pulled off these projects. Our company went into these jobs and with Railhead bits on four of our machines did a mile and a half in a week. On one project we drilled 4,100 ft. in 4 days compared to another contractor's 300 ft."

Steve Leath, Directional Drilling Service, LLC.

"I wish I would have had the Incredibit 2 years ago" says Curt Ward who owns Performance Cable Contracting, Inc. "I am a cable TV contractor in Buffalo, New York and I have two microboring machines. I had to make an 80 ft. drill across a street in a subdivision and was unable to get even one pipe in before hitting hard shale. I wore out two bits and made no headway at all. Then, I tried the Incredibit. I couldn't believe it! In one hour I had completed the bore. Now, I use the Incredibit on every job I do. The time and money I have saved has been amazing."

Curt Ward, Performance Cable Contracting, Inc.

"There was a 320 ft. bore in Fayette, Ohio under a creek that was pure red sandstone. One contractor with a D24x40 burned up his bit and pulled off the job. Another contractor with a JT4020 burned up his first bit, put on a rock bit and finally got across, but trashed the bit in the process. We came in with a D16x20 with an Incredibit on our machine and made the bore in a half a day. I am still using this same bit on other jobs and have only had to replace a couple of broken teeth. The production we've gotten from using the Incredibit has more than made it worth the investment."

Patrick Siddel, Siddel's Directional Drilling, Inc., Madison, OH

Home | Testimonials | FAQ | Contact Info | Site Map
©2002-2006 Railhead Underground Products, LLC